HERO-TECH AIR COOLED SCREW CHILLER
150Ton/TR Water Cooled Screw Type Water Chiller for Plastic Machine
Model:HTS-150WD
Product introduction
HTS-A/W series industrial chiller is mainly applied in Plastic & Rubber industry; It can accurately control the molding temperature and shorten the molding cycle, increase the product quality and improve the production efficiency. They are also widely used in Metal working, Mechanical & Engineering, Chemical & Pharmaceutical, Food & Beverage, Laser, Electronics industry, Textile, Electroplate, Semi-conductor testing, Water jet, Vacuum coating, Construction.
Not all chillers are created equal. For efficient cooling and long-lasting performance, you can depend on HERO-TECH of Cooling Products for all your cooling needs.
| Model |
HTS-150WD |
| Nominal cooling capacity |
7ºC |
kcal/h |
411080 |
| kw |
478.0 |
| ton |
135 |
| 12ºC |
kcal/h |
490888 |
| kw |
570.8 |
| ton |
162 |
| Input power |
kw |
100.6 |
| Power source |
|
3PH 380V~415V 50HZ/60HZ |
| Refrigerant |
| Type |
|
R22 |
| Charge |
kg |
42*2 |
| Control |
|
Thermostatic expansion valve |
| Compressor |
| Type |
|
Semi-Hermetic screw |
| Power |
KW |
50.3*2 |
| Start mode |
|
Y-△ |
| Capacity control |
% |
0-25-50-75-100 |
| Evaporator |
| Type |
|
Shell and tube(ss plate heat exchanger) |
| Chilled water volume |
m3/h |
79 |
| Tank volume |
Iiter |
46 |
| Pipe connection |
Inch |
5 |
| Condenser |
| Type |
|
Shell and tube |
| Cooling water flow |
m³/h |
98.4 |
| Water pressure drop |
kPa |
42 |
| Pipe connection |
inch |
3*2 |
| Safety devices |
|
Compressor inner protection, over current protection, high/low pressure protection, over temperature protection, flow rate protection, phase sequence/phase missing protection, low level coolant protection, anti freezing protection, exhaust overheat protection |
| Dimension |
| Length |
mm |
3150 |
| Width |
mm |
850 |
| Height |
mm |
1750 |
| Net weight |
kg |
2650 |
| Running weight |
kg |
2970 |
The above specifications are according to the following design conditions:
1. Chilled water inlet/outlet temperature 7ºC/12ºC.
2. Cooling air inlet/outlet temperature 30ºC/38ºC.
Cooling capacity of R407C unit will be 5% lower than R22 unit
We reserve the right to modify the specifications without further notice. |
Company Show
Hero-Tech Group Company Limited was established in 1997, which integrated with R&D, Production. Marketing and Technical service. Shenzhen Hero- Tech Refrigeration Equipment Co, Ltd, subordinated to Hero- Tech Group, was founded in Shenzhen Guangdong Province in2005, with registered capital RMB5,000,000.00. And we have our own heat exchanger processing factory and Casing processing factory.
Hero-Tech is dedicated to research and develop of industrial cooling and temperature controlling of the industry, products range including both air cooled and water cooled Scroll Chiller, Screw Type Chiller, Low Temperature Chiller, Explosion-proof chiller, Inverter type chiller Multi- control chiller High precision temperature control Chiller, Heating & Cooling Chiller and Oil chiller, etc.
"Professional, therefore take the lead". After years of development, Hero-Tech has domestic and foreign customers consistent high praise because of excellent product performance and high efficiency service.
FAQ:
Q1: Could you help us to recommend the model for our project?
A1: Yes, we have engineer to check the details and choose the correct model for you. Based on the following:
Cooling capacity; If you don't know, you can offer the flow rate to your machine, temperature in and temperature out from your using part;Environment temperature; Refrigerant type, R22, R407c or other, pls clarify; Voltage;Application industry; Pump flow and pressure requirements; Any other special requirements.
Q2: How to ensure your product with good quality?
A2: All our products with CE certificate and our company Strictly comply with ISO900 quality management system. We use the worldwide famous brand accessories.
The units will be fully tested before package and The packing will be carefully checked.
Q3: What's the warranty?
A3: 1 year warranty for all parts; Whole life labor free!
Q4: Are you a manufacturer?
A4: Yes, we have more than 23 years in industrial refrigeration business. Our factory located in Shenzhen; Welcome to visit us at anytime. Also have patent on the chillers' design.
Q5: How can I place an order?
A5: Contact us online service made in China, or send us enquiry.
Audited Supplier 
){kind=link}
){kind=link}