2200kw Energy Saving Water Cooled Screw Type Chiller with Ce

• Customization: Available
• After-sales Service: Video Guide
• Warranty: 1 Year
• Model NO.: HTS-540WD
• Type: Water-Cooled
• Cooling Method: Water-cooled
• Unit Structure: Integral
• Selected Voltage: 380V/50HZ
• Compressor Number: 2
• Noise Level: Ultra Quiet
• Certification: ISO, CE
• Condition: New
• Transport Package: Export Standard Package
• Specification: 4420*1650*2450mm
• Trademark: HERO-TECH
• Origin: Shenzhen China
• HS Code: 8418692090
• Production Capacity: 800sets/Year

Product Description

HERO-TECH AIR COOLED SCREW CHILLER
2200KW Energy Saving Water Cooled Screw Type Chiller with Ce
Model:HTS-540WD

Product introduction
HTS-A/W series industrial chiller is mainly applied in Plastic & Rubber industry; It can accurately control the molding temperature and shorten the molding cycle, increase the product quality and improve the production efficiency. They are also widely used in Metal working, Mechanical & Engineering, Chemical & Pharmaceutical, Food & Beverage, Laser, Electronics industry, Textile, Electroplate, Semi-conductor testing, Water jet, Vacuum coating, Construction.
Not all chillers are created equal. For efficient cooling and long-lasting performance, you can depend on HERO-TECH of Cooling Products for all your cooling needs.

Specification details 

Model			HTS-540WD
Nominal cooling capacity	7ºC	kcal/h	1529080
		kw	1778
	12ºC	kcal/h	1830252
		kw	2182.2
Input power		kw	403.6
Power source			3PH 380V~415V 50HZ/60HZ
Refrigerant
Type			R22
Charge		kg	165*2
Control			Thermostatic expansion valve
Compressor
Type			Semi-Hermetic screw
Power		KW	201.8*2
Start mode			Y-△
Capacity control		%	0-25-50-75-100
Evaporator
Type			Shell and tube(ss plate heat exchanger)
Chilled water volume		m3/h	306
Tank volume		Iiter	46
Pipe connection		Inch	10
Condenser
Type			Shell and tube
Cooling water flow		m³/h	382
Water pressure drop		kPa	48
Pipe connection		inch	6*2
Safety devices			Compressor inner protection, over current protection, high/low pressure protection, over temperature protection, flow rate protection, phase sequence/phase missing protection, low level coolant protection, anti freezing protection, exhaust overheat protection
Dimension
Length		mm	4420
Width		mm	1650
Height		mm	2450
Net weight		kg	6000
Running weight		kg	6600
The above specifications are according to the following design conditions: 1. Chilled water inlet/outlet temperature 12ºC/7ºC. 2. Cooling air inlet/outlet temperature 30ºC/35ºC. Cooling capacity of R407C unit will be 5% lower than R22 unit We reserve the right to modify the specifications without further notice.

ApplicationDependable, versatile, high-efficiency cooling.HERO-TECH chillers deliver value to a wide variety of applications with enhanced energy-efficiency options.
Medium and large scale industrial cooling
Central air conditioning system
Cold room, thermostatic chamber

Design features
Well Known Brand Compressor
Adjustable infinite or closely stepped capacity control, features energy efficient, stable and quiet running. 
Most advanced patented highest precision manufacturing process. 
Built-in full intelligent monitoring and protection including thermal motor temperature monitoring, phase sequence monitoring, manual reset lock-out, oil temperature sensor. 
Wide range of refrigerant for option, including R134A, R407c and R22(R404A, R507c upon request). 
Microprogramming Control System
Industrial PLC centralized control combined with compressor capacity control system, precisely monitor. 
Integrated protection for low temperature, high/low pressure, anti-freezing, phase missing, anti-phase, overload, motor over temperature, oil differential, flow switch, start up latency. 
Optional operation language, menu leading, unit running state easy to adjust. 
Easy Installation, Reliable Running
Closely stepped start-up, minimize impact to electricity. 
Steady and safe running, low vibration, easy for installation. 
Compact structure, less space demand and light in weight, easy for transport and installation. 
Completely wired, inspected and tested pre-delivery, saving installation time and cost. 

·Shell and tube evaporator and condenser,high efficient
thread red copper tube(material change on request).
·Siemens PLC control,LCD touch screen interface,easy
operation,standard design charged.
·R22,CFC Free R407C,R134A for option.
·380V-415V/50HZ3PH for standard design,Chiller unit
can be supplied according to different requirements.

Four advantages of HERO-TECH

Brand strength	We are the professional and top supplier of industrial chiller with 20 years experience.
Professional Guidance	Professional and experienced technician & sales team service to the oversea market, offering professional solution according to requirements;
Fast delivery	1/2hp to 50hp air-cooled chillers in stock for immediately delivery;
Golden service	Service call response within 1 hour, solution offered within 4hrs, and own oversea installation and maintenance team

Services

Packing and shipment

Worldwide products

FAQ:
Q1: Could you help us to recommend the model for our project? 
A1: Yes, we have engineer to check the details and choose the correct model for you. Based on the following: 
Cooling capacity; If you don't know, you can offer the flow rate to your machine, temperature in and temperature out from your using part;Environment temperature; Refrigerant type, R22, R407c or other, pls clarify; Voltage;Application industry; Pump flow and pressure requirements; Any other special requirements. 

Q2: How to ensure your product with good quality? 
A2: All our products with CE certificate and our company Strictly comply with ISO900 quality management system. We use the worldwide famous brand accessories. 
The units will be fully tested before package and The packing will be carefully checked.

Q3: What's the warranty? 
A3: 1 year warranty for all parts; Whole life labor free!

Q4: Are you a manufacturer? 
A4: Yes, we have more than 23 years in industrial refrigeration business. Our factory located in Shenzhen; Welcome to visit us at anytime. Also have patent on the chillers' design. 

Q5: How can I place an order? 
A5: Contact us online service made in China, or send us enquiry via email:, call us via Cel number [phone] directly.