HERO-TECH Water Chiller for Laser Industry and Laboratory
55KW Air Cooled Laser Water Chiller
Model:HTL-20AD
Product Introduction
In laser system. Laser source and beam controller would need to be cooled. Cooling water is normally required in the rage of 15ºC to 22ºC, with ±1ºC or 2ºC accuracy and sometimes within ± 0.1ºC. Laser has special requirements for conductivity and corrosiveness of cooling water, normally water loop should be stainless steel materials.
Application
Laser chiller is mainly applied for laser marker,laser engraving machine,laser welder,laser cutting machine,laser ink jet machine,etc,for maintaining required temperature of laser equipment,so to ensure normal running.
Specification details
Model |
HTL-20AD |
Nominal cooling capacity |
Kcal/h |
46629 |
kw |
54.22 |
Input power |
kw |
18.6 |
Power source |
|
3PH 380V~415V 50HZ/60HZ |
Refrigerant |
Type |
|
R22 |
Control |
|
Thermostatic expansion valve |
Compressor |
Type |
|
Hermetic-scroll |
Motor power |
kw |
7.4*2 |
Condenser |
Type |
|
Finned coil + low noise axial fan |
Air volume |
m³/h |
20000 |
Fan power |
kw |
0.8*2 |
Evaporator |
Type |
|
Shell and tube(ss plate heat exchanger) |
Chilled water volume |
m³/h |
8.84 |
Tank volume |
liter |
350 |
Pipe connection |
m³/h |
2-1/2 |
Pump |
Power |
kw |
2.2 |
Lift |
m |
20 |
Flow switch |
Operate flow>16L/min, release flow<10L/min |
Safety devices |
Compressor inner protection, over current protection, high/low pressure protection, over temperature protection, flow rate protection, phase sequence/phase missing protection, low level coolant protection, anti freezing protection, exhaust overheat protection |
Dimension |
Length |
mm |
2010 |
Width |
mm |
950 |
Height |
mm |
1990 |
Net weight |
kg |
650 |
Note:
The above specifications are according to the following design conditions:
1.Chilled water inlet/outlet temperature 12ºC/7ºC
2.Cooling air inlet/outlet temperature 30ºC/38ºC
We reserve the right to modify the specifications without further notice. |
FAQ
Q1: Could you help us to recommend the model for our project?
A1: Yes, we have engineer to check the details and choose the correct model for you. Based on the following:
Cooling capacity; If you don't know, you can offer the flow rate to your machine, temperature in and temperature out from your using part; Environment
temperature; Refrigerant type, R22, R407c or other, pls clarify; Voltage; Application industry; Pump flow and pressure requirements;
Any other special requirements.
Q2: How to ensure your product with good quality?
A2: All our products with CE certificate and our company Strictly comply with ISO900 quality management system.
The units will be fully tested before package and The packing will be carefully checked.
Q3: What's the warranty?
A3: 1 year warranty for all parts; Whole life labor free!
Q4: Are you a manufacturer?
A4: Yes, we have more than 23 years in industrial refrigeration business. Our factory located in Shenzhen; Welcome to visit us at anytime. Also have patent on the chillers' design.
Q5: How can I place an order?
A5: Contact our online customer service.