0.8ton/Rt Air Cooled Laser Water Chiller for Laser Marker

• Type: Air-Cooled
• Cooling Method: Air-cooled
• Unit Structure: Integral
• Selected Voltage: 220V/50HZ
• Compressor Number: 1
• Noise Level: Ultra Quiet
• Model NO.: HTL-1A
• Application Fields: Laser,Electroplating,Laboratory,
• Certification: ISO, CE
• Condition: New
• Transport Package: Export Standard Package
• Specification: 600*400*885
• Trademark: HERO-TECH
• Origin: Shenzhen China
• HS Code: 8418692090
• Production Capacity: 3000sets/Year

Product Description

HERO-TECH Water Chiller for Laser Industry and Laboratory
0.8ton/rt Air Cooled Laser Water Chiller for Laser Marker
Model:HTL-1A

Product Introduction
In laser system. Laser source and beam controller would need to be cooled. Cooling water is normally required in the rage of 15ºC to 22ºC, with ±1ºC or 2ºC accuracy and sometimes within ± 0.1ºC. Laser has special requirements for conductivity and corrosiveness of cooling water, normally water loop should be stainless steel materials.

Application
 Laser chiller is mainly applied for laser marker,laser engraving machine,laser welder,laser cutting machine,laser ink jet machine,etc,for maintaining required temperature of laser equipment,so to ensure normal running.

Specification details

Model			HTL-1A
Nominal cooling capacity		Kcal/h	2385
		kw	2.75
Input power		kw	1.4
Power source			1PH 220V 50HZ
Refrigerant
Type			R22
Control			capillary
Compressor
Type			Hermetic-rotary
Motor power		kw	0.89
Condenser
Type			Finned coil + low noise axial fan
Air volume		m³/h	1000
Fan power		kw	0.14
Evaporator
Type			Shell and tube(ss plate heat exchanger)
Chilled water volume		m³/h	0.476
Tank volume		liter	16
Pipe connection		m³/h	1/2
Pump
Power		kw	0.37
Lift		m	20
Flow switch			Operate flow>3.5L/min, release flow<1.4L/min
Safety devices			Compressor inner protection, over current protection, high/low pressure protection, over temperature protection, flow rate protection, phase sequence/phase missing protection, low level coolant protection, anti freezing protection, exhaust overheat protection
Dimension	Length	mm	600
	Width	mm	400
	Height	mm	885
Net weight		kg	52
Note: The above specifications are according to the following design conditions: 1.Chilled water inlet/outlet temperature 12ºC/7ºC 2.Cooling air inlet/outlet temperature 30ºC/38ºC We reserve the right to modify the specifications without further notice.

 

FAQ

Q1: Could you help us to recommend the model for our project? 
A1: Yes, we have engineer to check the details and choose the correct model for you. Based on the following:
Cooling capacity; If you don't know, you can offer the flow rate to your machine, temperature in and temperature out from your using part; Environment
temperature; Refrigerant type, R22, R407c or other, pls clarify; Voltage; Application industry; Pump flow and pressure requirements; 
Any other special requirements. 

Q2: How to ensure your product with good quality? 
A2: All our products with CE certificate and our company Strictly comply with ISO900 quality management system. 
The units will be fully tested before package and The packing will be carefully checked.

Q3: What's the warranty? 
A3: 1 year warranty for all parts; Whole life labor free!

Q4: Are you a manufacturer? 
A4: Yes, we have more than 23 years in industrial refrigeration business. Our factory located in Shenzhen; Welcome to visit us at anytime. Also have patent on the chillers' design.

Q5: How can I place an order? 
A5: Contact our online customer service.