Technical Specifications
| Model |
HTI-5A |
| Chilled water temperature |
ºC |
12 |
| Nominal Cooling Capacity |
Kcal/h |
12212 |
| KW |
14.2 |
| Ton |
4 |
| Max Power Consumption |
KW |
5.23 |
| Power Source |
|
3PH 400V 50HZ |
| Refrigerant |
Type |
|
R407c |
| Control |
|
Capillary |
| Compressor |
Type |
|
Hermetic Scroll |
| Power |
KW |
4.12 |
| Condenser |
Type |
|
finned copper coil + low noise axial fan |
| Fan Motor |
KW |
0.18×2 |
| Air Volume |
m3/h |
5000 |
| Evaporator |
Type |
|
SS plates type + SS Tank |
| Chilled water volume |
m3/h |
2.2 |
| Tank volume |
Liter |
30 |
| Pipe Connection |
Inch |
1 |
| Pump |
Power |
KW |
0.75 |
| Pressure |
bar |
2 |
| Lift |
m |
25 |
| Dimension |
Length |
mm |
1180 |
| Width |
mm |
580 |
| Height |
mm |
1300 |
| Net Weight |
KG |
190 |
NOTE: The specifications based on the following design conditions:
- Chilled water supply/return temperature: 12ºC / 17ºC
- Cooling air inlet/outlet temperature: 30ºC/38ºC
- Chiller is used under 40C ambient temperature;
- Temperature setting range: 10 ~ 35 degrees
We reserve the right to modify the specifications without further notice.
Design features
Refrigerant system:
- Adopt R-407c environmentally friendly refrigerant
- Adopt world well-known compressor --- Japan Panasonic scroll compressor
- Adopted aluminum fin & copper tube type condenser, easy for cleaning
- Low noise and large air blower, ensure sufficient cooling air volume
The Plates type evaporator ( SS304 plates type heat exchanger ) ensure a steady water
temperature offered, reduces ambient heat again, increases cooling efficiency
Chilled water system:
- Water loop are made of stainless steel, Galvanized steel pipe
- Adopt iron pump ( 2bar pressure, 3.5m³/h flow )
- Chiller Inlet and outlet water connections in Stainless steel : BSP 1'' (external thread)
- Add by-pass valve to adjust the water output flow volume and pressure
Control Protection system:
- Microcomputer control system offering accurate temperature stability within ±2ºC
(Higher accuracy to minus plus 0.5 ºC optional)
- Refrigerant pressure gauges help quickly understand system problems
- Multi-protection devices ensure the chiller unit running stably and safely
·Compressor inner protection,
·Over current protection,
·High&low pressure protection,
·Over temperature protection,
·Water flow rate protection,
·Anti-freezing protection.
Installation
For air cooled chiller, the heat generated and transferred by compressor can only be removed by ambient air, so the ventilation is very important. (See picture 1-1, regular installation condition).
Installation site should be drafty orequipped with air duct. If the long duct influence the dissipation effect, a fan motor with same or bigger air volume should be mounted at the outlet of it. When install air duct, please make space for future maintenance.
Company Profile
Hero-Tech Group Company Limited was established in 1997, which integrated with R&D, Production. Marketing and Technical service. Shenzhen Hero- Tech Refrigeration Equipment Co, Ltd, subordinated to Hero- Tech Group, was founded in Shenzhen Guangdong Province in2005, with registered capital RMB5,000,000.00. And we have our own heat exchanger processing factory and Casing processing factory.
Hero-Tech is dedicated to research and develop of industrial cooling and temperature controlling of the industry, products range including both air cooled and water cooled Scroll Chiller, Screw Type Chiller, Low Temperature Chiller, Explosion-proof chiller, Inverter type chiller Multi- control chiller High precision temperature control Chiller, Heating & Cooling Chiller and Oil chiller, etc.
FAQ:
Q1: Could you help us to recommend the model for our project?
A1: Yes, we have engineer to check the details and choose the correct model for you. Based on the following:
Cooling capacity; If you don't know, you can offer the flow rate to your machine, temperature in and temperature out from your using part;Environment temperature; Refrigerant type, R22, R407c or other, pls clarify; Voltage;Application industry; Pump flow and pressure requirements; Any other special requirements.
Q2: How to ensure your product with good quality?
A2: All our products with CE certificate and our company Strictly comply with ISO900 quality management system. We use the worldwide famous brand accessories.
The units will be fully tested before package and The packing will be carefully checked.
Q3: What's the warranty?
A3: 1 year warranty for all parts; Whole life labor free!
Q4: Are you a manufacturer?
A4: Yes, we have more than 23 years in industrial refrigeration business. Our factory located in Shenzhen; Welcome to visit us at anytime. Also have patent on the chillers' design.
Q5: How can I place an order?
A5: Contact us online service made in China, call us via Cel number +86 15920056387 directly.
Audited Supplier 
){kind=link}
){kind=link}